How to choose the best Murphy bed for Airbnb: 2025 buyer’s guide
Key Takeaways
A Murphy bed can make a rental more flexible, but its value depends on room fit, guest comfort, and how easily it can be reset between stays.
Measure the full open-bed footprint, not just the wall space.
Compare the mattress, frame, mechanism, finish, and warranty before choosing a model.
Treat listed price ranges as planning estimates and confirm current product details with the seller.
Include delivery, mattress, assembly, and installation in the total budget.
Add safe operation and hardware checks to the guest instructions and turnover routine.
Why Murphy beds can work well in Airbnb rentals
From our experience furnishing 3,000+ properties, a convertible bed earns its place only when its open footprint and daily setup suit the room. Bee Setups reports 138% more views in its supplied performance data, though that figure is not a Murphy-bed result and should not be treated as one. A wall bed may help a room serve more than one purpose, but it is not automatically a better guest bed than a conventional one.
Make limited floor space more useful between guest stays
A bed that folds away can leave more of a small room available for daytime use. That can matter in a studio or multipurpose spare room, where a permanent bed may dominate the layout even when nobody is sleeping. The aim is not to make the room feel empty; it is to give guests enough space to move around and use the room comfortably.
Match the bed style to the room’s everyday purpose
Start with what the room needs to do when it is not being used for sleep. A desk, seating area, or open floor may make sense in one rental, while another room may be better served by a conventional bed that stays ready to use. This rental furnishing guidance can help frame the wider decision: choose furniture around the property’s practical use, not just the appeal of a clever feature.
Weigh extra sleeping capacity against setup effort
The extra flexibility comes with a task: someone has to lower the bed, prepare it, and return it to its stored position. Consider whether guests can operate the mechanism safely and whether your cleaner has enough time to check it between stays. A queen Murphy bed discussion also reflects a useful question for any host: will the room’s alternate use justify the cost and the trade-off in convenience?
What to look for in a Murphy bed for Airbnb
A good choice is a fit for both the room and the way it will be used by guests and cleaners. Product names and attractive finishes tell only part of the story; dimensions, mattress specifications, anchoring, and service terms deserve equal attention. These checks can help you narrow the options before comparing particular models.
Choose a durable frame and mechanism built for frequent use
With a rental, the mechanism may be used by people who have never seen it before, so ease of operation and clear setup guidance matter alongside materials. Ask the seller what is included, what maintenance is recommended, and how replacement parts can be obtained. When assessing a model, look for clear answers on these points:
What parts of the frame and operating mechanism are included in the quoted configuration?
Does the seller provide operating and maintenance instructions?
How can an owner order replacement hardware or service parts?
What use, care, or installation conditions affect the warranty?
These questions are more useful than assuming a product is suitable for frequent turnover based on its appearance. Keep the answers with the installation documents so your property manager or cleaner can refer to them.
Check mattress size, thickness, and guest comfort
A queen label does not tell you everything a guest will notice. Confirm the mattress dimensions and any thickness limits for the exact model, then check what mattress is included, if any. Comfort also depends on the mattress itself, linens, and the ease of getting into and out of bed, so treat the complete sleep setup as one purchase decision.
Confirm the open-bed footprint fits the room and clearances
Measure the bed in both its stored and open positions, then mark the open footprint on the floor with tape. Include the space needed to walk around it, open doors, reach windows, and access the room’s usual furniture. A Murphy bed overview for Airbnb offers context on why hosts consider this kind of space-saving arrangement, but the measurements of your own room should decide whether it works.
Prioritize secure anchoring and professional installation
A wall bed must be installed in accordance with the manufacturer’s instructions and anchored to a suitable structure. Before ordering, confirm what the wall is made of, what anchoring method the product requires, and whether a qualified installer should handle the work. If the wall or floor conditions are uncertain, have them assessed rather than guessing from a product photo.
Look for guest-friendly operation and clear instructions
Guests should be able to understand the bed without searching through a long manual or moving furniture out of the way. Simple printed directions can explain how to lower and raise the bed, what to do with bedding, and whom to contact if the mechanism does not move smoothly. Keep the instructions close by, but outside the bed’s path and clearances.
Compare materials, finish, warranty, and replacement-part access
Finishes should suit the room and be manageable to clean, while the warranty should spell out coverage and exclusions. Ask how the product should be cared for and whether replacement parts remain available after the initial purchase. For broader short-term-rental design ideas, this Murphy bed buying and fit guide is a useful reference alongside the seller’s current specifications.
Five Murphy beds to consider for Airbnb rentals
The models below are starting points for comparison, not a guarantee that any one will fit a particular property. The price bands are planning estimates, not confirmed current quotes, and configurations, mattresses, shipping, and installation can change the total. Check exact dimensions, included components, and current terms with each seller before making a decision.
Bestar Pur Queen Murphy Bed: price range, strengths, and trade-offs
The Bestar Pur Queen is one of the named queen-size options to investigate if you want to compare a complete bed product with a separate hardware kit. A broad planning range is about $1,500–$2,500 before delivery and installation; verify the current price and what the listed configuration includes. Its practical advantage in a shortlist is that it gives you a specific product to evaluate, while the trade-off is that the actual room fit and value depend on the selected configuration.
Name | Price | Best For | Feature | Rating |
|---|---|---|---|---|
Bestar Pur Queen Murphy Bed | $1,500–$2,500 est. | Hosts comparing queen models | Queen-size named model; confirm included components | 3.5/5* |
The rating is an editorial screening score based on how much must be confirmed before purchase, not a tested durability score. Compare the seller’s measurements and warranty with your own requirements rather than relying on the range alone.
Lori Bed Queen: price range, strengths, and trade-offs
For a queen-size comparison, put the Lori Bed Queen alongside other models and request an itemized price for the exact version you are considering. A broad planning range is about $1,500–$2,500, subject to current seller pricing and configuration. The useful part of this comparison is the chance to weigh the complete product against a kit; the trade-off is that you still need to verify what is included and what installation will require.
Name | Price | Best For | Feature | Rating |
|---|---|---|---|---|
Lori Bed Queen | $1,500–$2,500 est. | Hosts comparing queen models | Queen-size named model; verify exact specifications | 3.5/5* |
That range is for early budgeting only. Ask for current dimensions, mattress requirements, delivery details, and warranty terms before treating it as a candidate for a specific room.
BredaBeds Queen Murphy Bed: price range, strengths, and trade-offs
The BredaBeds Queen Murphy Bed belongs on a shortlist when you want to compare another named queen option on its actual specifications and quote. Use about $1,500–$3,000 as a broad planning range, then confirm the current price with the seller. The strength of adding it to a shortlist is a direct comparison point; its trade-off is that the model name alone does not establish what comes in the package or whether its dimensions suit your room.
Name | Price | Best For | Feature | Rating |
|---|---|---|---|---|
BredaBeds Queen Murphy Bed | $1,500–$3,000 est. | Hosts comparing queen models | Queen-size named model; confirm configuration | 3.5/5* |
Treat seller documentation as decisive: look for a dimensioned drawing, written mattress requirements, warranty details, and an itemized quote. Those specifics matter more than a small difference between estimated price bands.
Wilding Wallbeds Queen: price range, strengths, and trade-offs
Wilding Wallbeds Queen is another named model to compare on price, dimensions, finish choices, and installation requirements. A broad estimate for planning is $1,500–$3,500, but the actual price depends on the exact product and any options. Its place in the shortlist gives hosts one more quote to compare; the main trade-off is the need to confirm the specific configuration rather than assuming the name describes everything included.
Name | Price | Best For | Feature | Rating |
|---|---|---|---|---|
Wilding Wallbeds Queen | $1,500–$3,500 est. | Hosts comparing queen models | Queen-size named model; request exact details | 3.5/5* |
Before choosing, check the same items you checked for the other models: the open footprint, mattress limits, installation instructions, service access, and full delivered cost. The comparison is only meaningful if each quote covers a similar scope.
Create-A-Bed DIY Murphy Bed Kit: price range, strengths, and trade-offs
A kit can appeal to an owner who wants to coordinate the build and installation rather than compare only complete bed products. Use $500–$1,500 as a broad planning estimate for the kit category and verify the current Create-A-Bed price and contents directly. The potential advantage is a kit-based route to consider; the trade-off is that the host must account for the additional materials, labor, and installation decisions needed to complete the project.
Name | Price | Best For | Feature | Rating |
|---|---|---|---|---|
Create-A-Bed DIY Murphy Bed Kit | $500–$1,500 est. | Owners considering a DIY build | Kit format; verify required materials and instructions | 3/5* |
A low kit price is not the same as a low installed cost. Confirm what tools, materials, mattress, and skilled labor may be needed, and only proceed if the installation can be completed safely and in line with the product instructions.
Compare the shortlisted beds by price and use case
A price comparison is most useful when every option is judged against the same needs. The table below condenses the models into a first-pass screen; the ranges are estimates for planning, and the ratings are editorial screening scores rather than independent product tests. Use current seller quotes and documentation to replace assumptions before you commit.
Comparison table: product, price range, best for, key feature, buyer criteria, and rating
The criteria column is a reminder of what to verify, not a claim that a product meets it. A quote that includes more of the required work may be better value than a lower headline price, so read each row as a prompt for follow-up.
Product | Price Range (est.) | Best For | Key Feature | Buyer Criteria to Verify | Rating* |
|---|---|---|---|---|---|
Bestar Pur Queen Murphy Bed | $1,500–$2,500 | Comparing queen models | Named queen model | Dimensions, package contents, warranty | 3.5/5 |
Lori Bed Queen | $1,500–$2,500 | Comparing queen models | Named queen model | Mattress limits, anchoring, service parts | 3.5/5 |
BredaBeds Queen Murphy Bed | $1,500–$3,000 | Comparing queen models | Named queen model | Finish, open footprint, quote scope | 3.5/5 |
Wilding Wallbeds Queen | $1,500–$3,500 | Comparing queen models | Named queen model | Installation needs, warranty, dimensions | 3.5/5 |
Create-A-Bed DIY Murphy Bed Kit | $500–$1,500 | Considering a DIY build | Kit format | Required materials, labor, instructions | 3/5 |
The scores are comparison aids based on information a buyer should confirm, not a verdict on long-term performance. The table cannot replace a current quote or a check of the manufacturer’s specifications.
Match the bed to your room layout, budget, and guest profile
A model that fits a small studio may not suit a room that guests use as a regular bedroom, and a low-cost option may not be the least expensive after installation. Think through room layout, the kind of guests you host, and how often someone will need to convert the room. If you manage other property decisions too, you may separately consult health insurance options, insurance agency reviews, real-estate email tools, event venue ideas, or a guide to motor-home ownership costs; those topics do not determine which bed fits your rental, so keep their research separate from this choice.
Account for delivery, assembly, mattress, and installation costs
Build the complete budget from itemized amounts rather than the product’s starting price. If your project includes a wider refresh, this STR design and furnishing advice can provide context for planning the room as a whole. As a separate reference, Murphy bed options for vacation rentals describe the general space-saving appeal, but the costs of a specific purchase still need to come from a current quote.
Consider whether freight or delivery fees apply to the address.
Add any required mattress, bedding, and room-finish work.
Include assembly, anchoring, and professional installation if needed.
Allow for schedule changes or extra materials discovered during installation.
These costs can make two similar-looking quotes very different. Write down what each quote includes, then compare the final installed totals rather than the product prices in isolation.
Plan a safe, practical installation
Installation is part of choosing a bed, not a detail to sort out after it arrives. A wall bed needs adequate space, a suitable anchoring surface, and a clear route for delivery and setup. Leave enough time to resolve questions before the next guest checks in.
Measure the room, wall, and open-bed clearance before ordering
Measure the intended wall and ceiling area, then confirm the bed’s open dimensions against the room’s actual layout. Check doors, windows, outlets, furniture, and the path to the bathroom or exit. A quick floor plan with the open bed drawn in can uncover a conflict that is easy to miss when looking only at the closed unit.
Check wall construction, anchoring needs, and local requirements
Find out what the wall is made of and follow the selected product’s anchoring instructions. Ask the manufacturer or installer what structural conditions are required, and arrange a professional assessment if you are unsure. Confirm applicable building or property requirements before work begins; do not assume that a wall suitable for ordinary furniture is suitable for a wall bed.
Arrange delivery and installation around booking dates
Choose a delivery and installation window that leaves time for inspection, setup, and any corrections before the room is listed as ready. Coordinate access with your cleaner or property manager, and keep the room unavailable until installation and operational checks are complete. This small buffer can prevent a rushed setup from becoming a guest-facing problem.
Give guests simple setup instructions without blocking access
A short instruction card should explain the basic steps, any bedding guidance provided by the manufacturer, and how to contact the host if the bed does not operate normally. Place it where guests can see it without putting it in the mechanism’s path. A clear, brief video can also help owners think through what to demonstrate during a setup walkthrough.
Keep the guidance consistent with the actual product instructions, and do not tell guests to force a stuck mechanism. Test the directions yourself before the first booking and revise them if a step is not obvious.
Keep the bed guest-proof through frequent turnovers
A wall bed is still furniture used by different people, so a quick repeatable check is more reliable than waiting for a guest to report a problem. Include the mattress, bedding, hardware, and surrounding clearances in the routine. Fixing a small issue before arrival is usually simpler than dealing with a room that cannot be used as expected.
Inspect hardware and mattress condition on a regular schedule
Check the mechanism and visible fasteners at a frequency that suits the manufacturer’s instructions and your booking volume. Look for loose or damaged parts, unusual resistance, and signs that the mattress or frame is wearing unevenly. If something feels wrong, stop using the bed until the cause has been assessed rather than asking guests to troubleshoot it.
Choose bedding and finishes that are easy to clean and replace
Use linens that fit the mattress and can be handled consistently by your cleaning team. Keep a replacement set available and follow care guidance for the bed’s finish, since cleaning products can affect some surfaces. A simple, repeatable setup also makes it easier for guests to understand what should remain on the bed when it is stored.
Add turnover checks that catch damage before the next arrival
A brief checklist helps different cleaners inspect the same things in the same order. Include a visual check of the unit, a gentle operation check when appropriate, and confirmation that instructions and the sleeping area are ready. If a problem appears, record it and keep the bed out of service until it is resolved.
Conclusion
The best murphy bed for airbnb is the one that fits the room, feels comfortable to sleep on, and can be operated and maintained safely between stays. Confirm current prices and specifications, budget for the complete installation, and test the guest instructions before the first booking. At Bee Setups, we've installed Murphy beds in thousands of properties; the supplied data also lists 92 hours saved, a figure to treat as reported context rather than a promise for any one project. If you want help planning a furnished rental, talk with Bee Setups about your space and setup needs.
Frequently Asked Questions
Are Murphy beds a good choice for Airbnb rentals?
They can work well when a room needs to serve more than one purpose and the open bed fits without blocking access. The right choice depends on guest comfort, safe installation, and how easy the bed is to prepare between stays.
What size Murphy bed should I choose for a rental?
Choose based on the room’s measured clearances and the needs of your typical guests. Confirm the exact mattress dimensions and open footprint for the selected model rather than relying on a size label alone.
Do guests find Murphy beds difficult to use?
Some guests may be unfamiliar with the mechanism, so provide short, clear instructions and test them before arrival. Guests should never need to force a bed that does not move normally.
How much does a Murphy bed for Airbnb cost?
The product price varies by model and configuration, and the full project may also include delivery, a mattress, assembly, and installation. Get current, itemized quotes before comparing options.
Does a Murphy bed need professional installation?
The answer depends on the product instructions, wall construction, and the installer’s assessment. If anchoring requirements or structural conditions are unclear, seek qualified help rather than guessing.
What should I check before ordering a Murphy bed?
Measure the wall and full open footprint, check mattress specifications, review anchoring requirements, and ask about warranty and replacement parts. Also confirm what the quoted price includes.
How can I maintain a Murphy bed between guest stays?
Follow the manufacturer’s maintenance guidance and check the visible hardware, mattress, bedding, and operating instructions during turnovers. Stop using the bed and arrange an assessment if it is damaged or does not operate normally.